HP 1910-16G Switch (JE005A)

Ports

16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

4 SFP 1000 Mbps ports

1 RJ-45 console port to access limited CLI port

Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination

Dimensions

17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height)

Weight          

6.8 lb (3.08 kg)

Memory and processor

Module            ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)

100 Mb Latency

< 5 µs

1000 Mb Latency

< 5 µs

Throughput

up to 29.8 million pps

Routing/Switching capacity

40 Gbps

Routing table size

32 entries

MAC address table size

8192 entries

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, non-condensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

10% to 95%, non-condensing

Frequency

50 / 60 Hz

Voltage

100-240 VAC

Maximum power rating

25.1 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A

Management

IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE

802.3 Ethernet MIB

Notes

SFP ports and copper ports can work simultaneously, independent of each other to give a total of 20 Gigabit-capable ports.