HP 1410-16 Switch (J9662A)

I/O ports and slots

16 RJ-45 autosensing 10/100 ports

Duplex: half or full (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)

Supports a maximum of 16 autosensing 10/100 ports

Physical characteristics

8.21(w) x 4.21(d) x 1.73(h) in (20.85 x 10.69 x 4.39 cm) (1U height)

Weight

1.43 lb (0.65 kg)

Memory and processor

16 Kb EEPROM; packet buffer size: 2 Mb

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table mounting

100 Mb Latency

< 10.6 µs (LIFO 64-byte packets)

1000 Mb Latency

Throughput

2.3 Mpps (64-byte packets)

Switching capacity

3.2 Gb/s

MAC address table size

8192 entries

Operating temperature

32°F to 104°F (0°C to 40°C)

Operating relative humidity

15% to 95% @ 104°F (40°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 90% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 0 dB No fan

Frequency

50/60 Hz

Maximum heat dissipation

13 BTU/hr (13.72 kJ/hr)

AC voltage

100 - 240 VAC

Current

0.3 A

Maximum power rating

3.6 W

UL 60950-1CSA C22.2 60950-1IEC 60950-1:2005EN 60950-1:2006 + A11:2009

IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-24G-R (JG708A), HP 1410-16 (J9662A) and HP 1410-24 (J9663A) Switches.