CVR100W-E-K9-EU
|
Features
|
Description
|
WAN
|
One 10/100 Mbps RJ-45 connector for WAN port
|
LAN
|
Four 10/100 Mbps RJ-45 connectors for LAN ports
|
Wireless
|
Built-in 802.11n wireless access point (two antennas)
|
LED
|
LAN1-4, WPS, Wireless, WAN, Power, and Do-Not-Disturb indication
|
Buttons/switches
|
Power, RESET, WPS, Wireless, and Do-Not-Disturb mode control
|
Do-Not-Disturb button
|
The Do-Not-Disturb button is used to turn the LEDs on the front panel on and off. Turning this button on or off will not affect the normal operation of the CVR100W.
- When this button is turned on, all lights on the front panel are off and the Do-Not-Disturb indication light on the back panel is solid green.
- When this button is turned off, all lights on the front panel are on and the Do-Not-Disturb indication light on the back panel is off.
|
Product dimensions (W x H x D)
|
106 in. x 94 in. x 26 in. (270 mm x 238.6 mm x 66 mm)
|
Weight
|
0.84 lb (0.38 kg)
|
Power supply
|
12V/0.5A
|
Cabling type
|
Category 5e or better
|
Certifications
|
SRRC, CE, CB, Wi-Fi
|
Operating environments
|
- Operating temperature: 0° to 40°C (32°to 104°F)
- Storage temperature: -30° to 60°C (-22° to 140°F)
- Operating humidity: 10% to 85% noncondensing
- Storage humidity: 5% to 95% noncondensing
|
Routing
|
- Static routing
- Routing Information Protocol (RIP) versions 1 and 2
- Inter-VLAN routing
|
Layer 2
|
- 802.1Q-based VLAN
- 6 active VLANs (VLAN ID Range: 4 to 4094)
|
Layer 3
|
- Dynamic Host Configuration Protocol (DHCP) Server
- Point-to-Point Protocol over Ethernet (PPPoE)
- Point-to-Point Tunneling Protocol (PPTP) pass-through
- Layer 2 Tunneling Protocol (L2TP) pass-through
- DHCP relay agent
- IGMP proxy and snooping
- Dynamic Domain Name System (DynDNS): oray.com and 3322.org
- Network Access Translation (NAT) and Port Address Translation (PAT)
- Port management
- Port mirroring
|
IPv6
|
- IPv4/IPv6 dual stacks
- IPv6 to IPv4 tunneling
- Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
- Stateless address auto-configuration (SLAAC)
- DHCPv6 Server for LAN IPv6 clients
- DHCPv6 Client WAN connection
- Internet Control Message Protocol (ICMP) version 6
- IPv6 static routing
- RIP Next Generation (RIPng): IPv6 Dynamic Routing
|
Security
|
- Stateful packet inspection (SPI) firewall
- Port forwarding and port triggering
- Access control lists (ACL) and content filtering
- DoS prevention
- Wireless MAC address filtering
- Static URL or keyword filtering
- Access control by schedule
- Web-based configuration utility (HTTP and HTTPS)
- Self-signed SSL certificateuting
|
VPN
|
- Up to 3 IPsec VPN tunnels by using the Cisco QuickVPN software
- PPTP, L2TP, and IPsec VPN passthrough
- 1 IPsec site-to-site tunnel
|
Quality of service
|
- 802.1p-based priority on LAN ports and application-based priority on WAN ports
- 4 queues
- Differentiated services code point (DSCP)
- Class of service (CoS))
- Bandwidth control
|
Management
|
- Local logs, system logs, and remote logs
- Upgrade the firmware from the web-based device manager
- Import and export system configuration (.txt)
- Remote management using the HTTP or HTTPS protocol)
- Bonjour and Universal Plug and Play (UPnP)
- Network diagnostics: Ping, traceroute, and DNS lookup
|
Performance
|
- NAT throughput: 90 Mbps
- Maximum new connections: 750
- Maximum concurrent connections: 15,000
- VPN throughput: 5 Mbps
|
Wireless radio
|
IEEE 802.11n wireless access point; complies with 802.11b/g
Wireless radio modes:
- 802.11b: Direct-Sequence Spread Spectrum (DSSS)
- 802.11g/n: Orthogonal Frequency-Division Multiplexing (OFDM)
- 2 built-in omnidirectional antennas with 1.8 dBi gain
Wireless channels:
- 13 selectable wireless channels
- Automatic channel selection
Transmit power:
- 802.11b: 17 dBm +/- 1.5 dBm
- 802.11g: 15 dBm +/- 1.5 dBm
- 802.11n: 12.5 dBm +/- 1.5 dBm
Receiver sensitivity:
- -87 dBm at 11 Mbps
- -71 dBm at 54 Mbps
- -68 dBm at msc15, HT20; -66dBm at mcs15, HT40
|
Wireless adjustment
|
- Press the Wireless button to enable or disable the wireless module
- Adjustable Wi-Fi power: OFF, 50%, 100%
|
Wireless Distribution System (WDS)
|
Up to 3 wireless access points to repeat the wireless signals
|
Wi-Fi Multimedia (WMM)
|
WMM (802.11e) and WMM Power Save (U-APSD)
|
Maximum number of connected wireless client stations
|
32 active wireless client stations simultaneously
|
Maximum number of active SSIDs
|
4 active SSIDs simultaneously
|
Isolation
|
Station isolation
|
Security
|
- Wi-Fi Protected Setup (WPS) 2.0
- Wired Equivalent Privacy (WEP)
- Wi-Fi Protocted Access (WPA)-Personal/Enterprise
- WPA2-Personal/Enterprise
|
Cisco Simple Connect
|
Provides a safe and convenient way for smart devices to connect internet via CVR100W.
|